IAG Performance AOS Hardware Kit AOS Replacement O-Ring Seals and Hardware Set

Subaru: WRX STI 13 - 21 Sport-tech / Tsurugi Edition / Launch Edition / Sport / Base / Limited / Series.HyperBlue / Kanrai Edition / STI / Type RA / S209, Subaru: Legacy 05 - 13 2.5GT / GT spec.B / GT Limited / GT, Subaru: Outback 05 - 09 2.5 XT / XT Limited / XT, Subaru: Forester 04 - 18 XT Sports / Sports 2.5 XT / XT / XT Premium / XT Limited / XT Touring / 2.5 XT, Subaru: WRX 12 - 21 Limited / Base / STI, Subaru: Baja 04 - 06 Turbo, Subaru: Impreza 04 - 14 WRX STI Special Edition / WRX SE / WRX GT / WRX Premium / 2.5 GT / WRX STI Limited / WRX STI / WRX / WRX Limited / WRX TR

• Includes: (x2) -340 Large Viton O-Rings (AOS Top / Bottom), (x2) -014 Medium Viton O-Rings (AOS Coolant Block Top / Bottom), (x2) -114 Medium Viton O-Rings (AOS Coolant Hoses), (x1) -022 Medium / Large Viton O-Ring (AOS Breather), (x2) -012 Small Viton O-Rings (AOS Coolant Block / Drain), (x4) M6 x 10mm Socket Head Cap Screws (AOS Coolant Back Bracket), (x6) M4 x 25mm Socket Head Cap Screw (AOS Coolant Blocks Top / Bottom), (x9) M4 x 8mm Socket Head Cap Screw (AOS Breather / Drain / Back Bracket)
• Not intended for use on V3 AOS.
• Note (1) extra M4x8mm screw will be left over when rebuilding a Comp Series AOS.

The IAG V2 AOS replacement o-ring seals and hardware set is designed for those rebuilding an IAG Air Oil Separator. Included in the set are the main hardware and seals to rebuild the body/can of either the version 2 Street or Competition Series AOS.