IAG Performance AOS Conversion Kit Air / Oil Separator (AOS) Street to Competition Series Conversion Kit

Subaru: WRX 15 - 21, Subaru: Forester 14 - 18

• 1068.101(b)(2).
• 1068.101(b)(I) and "Defeat Devices" in CAA§
• 203(a)(3)(A), 42 U.S.C. §
• 203(a)(3)(B), 42 U.S.C. §
• 7522(a)(3)(A), 40 C.F. R. §
• 7522(a)(3)(B), 40 C.F.R. §
• Competition Series AOS are "Competition Only" components for installation exclusively on "Competition" vehicles or "Racing" vehicles not subject to pollution control. IAG recommends the Competition Series AOS for Competition vehicles with greater than 600 WHP output. The Competition Series AOS prevents any oil suspended in the PCV gases from re-entering the turbo inlet but requires calibration or tune changes. Select a Street Series AOS if you prefer not to retune your Competition vehicle for this upgrade. For Competition vehicles, follow your engine builder's maintenance directions, but perform oil changes before every race or practice event . IAG is not offering any Competition only components for installation on street driven or regulated applications. Installing a Competition Series AOS on a vehicle other than a Competition vehicle used solely for competition motorsport may be violation of the federal prohibitions against "Tampering" provided in CAA§
• Kit Includes: (x1) IAG Competition Series Breather Port, (x1) Breather port o-ring, (x1) 1 inch I.D. breather discharge hose (55 inch length), (x1) 3/8 inch plastic plug, (x1) 5/8 inch rubber cap, (x8) 8 inch zip tie
• May require tune recalibration.
• This kit is designed to convert part# IAG-ENG-71X1 to part# IAG-ENG-72X1.
• This kit works for either V2 or V3 Air Oil Separators

The IAG AOS conversion kit for the 2015-21 Subaru WRX FA20 DIT engine is designed to switch the upper breather portion of the Street Series AOS to the Competition Series AOS. The kit includes the new billet aluminum Competition Series Single breather port, replacement breather o-ring, breather discharge hose, (x1) cap, (x1) plastic plug and zip ties.