Click on image to zoom

IAG Stage 4 CNC Ported Heads Pkg Stage 4 CNC Ported Heads w/ +1mm GSC Valves & GSC S2 Camshafts N25 Casting

Engine Cylinder Head and Camshaft Kit


IAG Stage 4 CNC Ported Heads w/ +1mm GSC Valves & GSC S2 Camshafts for 18-20 STI N25 Casting.

  • New Head Castings, Fully CNC Ported with +1mm GSC Valves, GSC Beehive Springs
Pricing: $6,299.99

Free ground shipping on all order over $100.00 (some exclusions may apply)


Subaru: WRX STI 18 - 21 Kanrai Edition / Sport-tech / Sport / STI / Type RA / Limited / Base / S209

  • Recommendations / Warranty: Assembly and professional installation recommended. Workmanship/parts warranty will only be available for professionally installed cylinder heads.
  • Stage 4 Ported Head Package Includes: (x2) Brand New Subaru OEM N25 Cylinder Head Castings, (x8) GSC 37mm (+1mm) Intake Valves, (x8) GSC 33mm (+1mm) SuperAlloy Exhaust Valves, (x16) GSC Beehive Springs & Retainers, (x16) GSC Manganese-Bronze Valve Guides, (x16) GSC Valve Stem Seals, (x1) GSC S2 Billet Camshaft Set, (x16) OEM valve lifters, IAG Performance CNC Porting Multi-Angle Valve Job, Drilling for compatibility with 1/2" or 14mm Head Studs, Cam Clearancing, Ultrasonic Cleaning

IAG Stage 4 Ported Heads with +1mm GSC Valves & Cams: IAG's Stage 4 Cylinder Head Package utilizes a CNC porting program for the WRX STI heads that was developed over the past five years and tested on the most successful high-horsepower Subarus. The ported head package starts with brand new WRX STI OEM N25 head castings directly from Subaru of America. The bare castings are visually inspected then fixtured into our in-house Centroid 5-axis CNC Machine, one of the most advanced precision engine machining equipment in the world. The Centroid CNC ports the intake and hard to reach exhaust "dog-leg" port runner. CNC porting offers consistent port results every time. Once the Centroid completes the port process the heads undergo a cam clearance machining process that removes material from the lifter area where large duration cam profiles are known to contact the castings. Short after the heads are drilled to fit larger 1/2" or 14mm head studs which are commonly used in high horsepower builds. Next, the OEM guides are pressed out and replaced in favor of GSC Manganese-Bronze valve guides that are shaped to improve airflow. Once all the new intake and exhaust guides are in place they are diamond-honed in our honing station. The heads are then fixtured in our Serdi 3.0 Valve Guide and Seat Machine to cut all intake and exhaust seats with a multi-angle valve job that suits the flow characteristics of GSC's +1mm valves. At this point, the heads decks are resurfaced using our TS-3000 BlockMate that cuts the aluminum to a smooth even finish. After resurfacing, the heads are ultrasonically cleaned to remove debris and oils from the machining process. The heads are then reassembled using GSC Billet S2 camshafts. The Stage 2 cams are intended for vehicles making 500-700 wheel horsepower. During the final assembly, the cams are matched to GSC Beehive Valve Springs and Retainers and GSC Viton stem seals then bench-lashed to a tolerance that is close to final specifications.


  • IAG-ENG-3045NS2
  • IAG-ENG-3045NS2
  • 887753779465
  • IAG Performance
  • New


Shipping Information

  • Item Requires Shipping
  • 92.0 lbs.
  • W16.0000” x H12.0000” x L20.0000”
  • Free ground shipping on all order over $100.00 (some exclusions may apply)

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.